10
selecting your input source
1.
Press HIFI then Bus-A.
2.
Press one of: Disc 1, Disc 2, Tape 2, Video or Radio.
adjusting the volume
1.
Press the button marked Vol + to increase the volume.
2.
Press Vol - to decrease the volume. The volume chosen will be displayed on the
digital display with figures from 0 to 98.
choosing your output
1.
Press OP 1 if your output is connected to O/P 1 on the back of your integrated
amplifier.
2.
Press OP 2 if you are using the line output from O/P 2 on the back of your
integrated amplifier.
3. Press OP 1+2 if you are bi-amping.
Note: With the CPM2650 and CPM3350 integrated amplifiers, O/P 1 is internally
connected to the internal amplifier stage. O/P 2 is the pre-amplifier output for
connecting to an additional external amplifier.
changing the balance
1.
Press the balance button marked Bal + to move the balance to the right.
2.
Press Bal - to move the balance to the left. The direction you are moving the
balance towards will be displayed on the digital display.
mute
1. Press Mute to mute the amplifier.
to unmute
1.
Press Mute again to unmute or
2.
Press the volume buttons up or down or
3. Turn the volume knob on your amplifier up or down.
