- 8 -
Digital Blood Pressure Monitor
MDBP13
Unit Operation
Battery Installation
Slide battery cover off as indicated by arrow.
Install 4 new AA alkaline batteries according to polarity.
Close battery cover.
AC Adapter jack is on the right side of the monitor. Medical AC adapter(DC 6.0 V,
600mA) can be used with the device (recommended, not provided). The adapter con-
nect pin should be positive inside and negative outside with a 2.1mm coaxial joint.
Do not use any other type of AC adaptor as it may harm the unit.
Time/Date Setting
With power off, press
“START/STOP” button about 3 seconds to set the
Time/ Date mode.
Set month first by adjusting the “MEM” button, Press
“STOP/START ”button setting the day, hour, and minute in same fashion.
Which in any setting mode. Press
“START/ STOP” button to turn the unit off.. All
information will be saved.