17
Figure 4.9 Mounting the inverter
Check the following items when installation is completed:
Step1: Ensure that the three supporting points (on the rear side of the inverter) align with
the three holes of the support.
Step2: Ensure that the inverter is well fixed.
Step3:Ensure that the inverter is locked on the support and an antitheft lock is installed.
CPS SCA-
T Series Inverter
Step 2
Install the rear panel on the wall using M12 expansion screw after put on the flat washer,
spring washer and nut respectively and the required torque is 42N.m. Mount the inverter on the
rear panel and keep them aligned with each other. After that, tighten the screw between the
machine and the rear panel, as
shown
in
Figure
4
.
9.
Summary of Contents for CPS SCA-T Series
Page 37: ...CPS SCA T Series Inverter 34 ...