INSTALLATION AND OPERATION
10)
DC Start function (cold start)
This function allows the UPS to be turned on also when the AC mains is not
present and the battery is completely charged. Press the general push button
to turn on the UPS.
11)
Green Power Function
All Desk Power Plus Series are equipped with Green Power Function. If no load is connected
to the UPS and the mains fails, it will automatically shut down in 5 minutes for battery and
energy saving. The UPS will restart when the mains recovers.
12)
Battery Replacement
Follow Chart 1 to Chart 3 to replace the battery. Disconnect all sources of supply before
battery replacement.
13
After removing the battery cover, gently extract the battery by disconnecting the
two wires connecting it to Desk Power Plus. Be sure to use the same type of
batteries and dispose the old battery properly at an appropriate recycling facility.
Chart 1
Remove the panel
Chart 2
Remove the battery cover
Chart 3
10H52164PUMC REV. 1/11-2003
UK
9)
DC Start Function
DC Start Function enables
the UPS to be started up
when AC utility power is not
available and battery is fully
charged .
Just simply press the power
switch to turn on the UPS.
Summary of Contents for Desk Power Plus 1000
