Chloride Desk Power Plus 1000, Operating Manual

Page: 12 / 16

3) Inspection
Remove the UPS from its package
and inspect it for any damage that
may have occurred during shipping.
If any damage is discovered, re-pack
the unit and return it to the place
of purchase.
INSTALLATION AND OPERATION
To install Desk Power Plus simply follow the instructions shown. Be aware that the Power
Switch must be kept in the “ON” position, otherwise, the UPS will be disabled and your
equipment will not be protected during a power failure.
4) Placement
Install the UPS unit in any protected environment that provides adequate airflow around
the unit, and is free from excessive dust, corrosive fumes and conductive contaminants. Do
not operate your UPS in an environment where the ambient temperature or humidity is
high. iOn the other hand, place the UPS unit away from the monitor by at least 20cm to
avoid interference.
20 cm
10 10H52164PUMC REV. 1/11-2003
UK