ECO 6 Digital Color Doppler Ultrasound System
75
yellow short line on it represents it is in active status. The distance between the two straight lines stands for
time you want to measure. You can drag the active straight line to anywhere you want to change the measured
time.
3. Press [
UPDATE
] to active the two straight lines in turns and dragon them to change the distance between
them. The measurement result will be displayed on the result area.
6.13.3
Heart rate
Heart rate is used to calculate the number of heart beats per minute from cardiac image.
Measurement steps:
1. Choose [
Heart rate
] menu item to enter into measurement.
2. The method is same as Time.
3. After the above measurement, the calculated heart rate result is displayed in the measurement result area.
4. Repeat the steps form1 to 3 to start next measurement.
6.13.4
Velocity
Measurement step:
1. Click [
Velocity
] to enter measurement condition.
2. Select the starting point and press [
ENTER
], the starting point and the removable cursor display, drag
cursor to the end point.
3. Press [
ENTER
] again, measurement completes, the result displays in the region of measurement
4. Repeat 1~3, and enter the next measurement of velocity.
Note:
The maximum number of the measurement result on the image area is one. The second
measurement result will cover the first one. The measurement result area will list all the measurement values.
6.14
General Measurement in M mode
At real-time status, press [
M
] key twice to enter M mode, press [
Calc
] to enter into M mode cardiology
measurement status.
Meas. Menu
Submenu
Unit
Meas. Method/
Meas. Formula
Comment
Distance
cm
Refer to M distance Meas.
Time
s
Refer to M time Meas.
Velocity
cm/s
Refer to M velocity Meas.
Heart Rate
Single Wave
bpm
Refer to M HR Meas.
Double Wave
bpm
Refer to M HR Meas.
6.15
M Abdomen Measurement
Refer to M mode general measurement.
WWW.CFS.IT - CFS PRODOTTI MEDICALI SRL
