ECO Series VET Digital Color Doppler Ultrasound System
57
6.1.4
[DEL]
Main functions are as follows:
In frozen status, press the [
DEL
], delete all the measurement results, comments and traces.
6.1.5
[Change]
Press [
Change
] to switch other menu;
Press [
Exit
] to exit;
6.1.6
[Exit]
Press [
Exit
] to exit the measurement menu.
6.1.7
Parameters control key
Press the corresponding key to update the function and use the function.
6.2
B Mode general Measurement methods
The system B mode contains Distance, Ellipse, and Trace.
6.2.1
Meas. Distance
Measurement steps:
1.Press the [
Calc
] key to enter into measurement. Update the [
distance
] item in the menu or press the quick
measure key [
Dist
], it will display a segment “+”icon.
2.Move the “+”icon by trackball to fit the one point of the line. Press [
ENTER
] to fix the start point and the
cursor can be moved to the next position.
3.Press [
UPDATE
] can change the activated point, and fit the other point of the line.
4.Move the cursor to the end-point, press [
ENTER
] again to complete the measurement.
5.After the measurement, the result will display in the measurement results area.
6.Repeat the steps from 1 to 4 to start next “distance” measurement. Press [
DEL
] to delete all the
measurements.
Note:
Each group of measurement is limited, if the measurement results beyond, it will begin a new group of
measurement automatically.
6.2.2
Ellipse
Measurement steps:
1.Press the [
Calc
] to enter into measurement. Update the [
Ellipse
] item in the menu or press the quick measure
Summary of Contents for ECO 1VET
Page 2: ......
