13 Local Configuration with a Telephone Handset
Some of the configurations that may be required by the Dialler can be entered by
using a standard telephone connected to the ‘DIAL’ port in place of the alarm
dialler. Configurations are entered using ‘*’ commands, as follows:
13.1 Dialler Default
To set default configuration use: *9**1234567890#.
13.2 IP Address
By default the Dialler will automatically negotiate its IP address with the IP
network. If a fixed address is required (this address will be allocated by the IT
manger), the following commands are used to set the IP address and related IP
parameters:
•
Own IP address: *65*0*nnnnnnnnnnnn# (12 digits)
•
Sub-net mask: *65*1*nnnnnnnnnnnn# (12 digits)
•
Default Gateway address: *65*2*nnnnnnnnnnnn# (12 digits)
To set back to automatic IP address, use *65*0*#.
Version 1.5 16/10/06
33
