EN-23
4. Pack the TV set carefully. Take special care to ensure the corners of the housing and
the screen are well protected.
5. Move the TV set and its accessories to its new location and start it up again.
Battery disposal
Do not dispose of any batteries in with the domestic waste. Return them to a
collection point for old batteries.
Troubleshooting
You can solve most common problems yourself using the table below. If the problem
persists after checking the suggested solutions, please contact your reseller.
General problems
TV set does not switch on
•
Plug the power cable of the TV set into a working power socket.
•
Replace the batteries in the remote control.
•
Unplug the plug of the power cable from the power socket. Wait approx. 30 seconds
and plug the power cable back in. The device should then work properly.
Remote control does not work
•
Is there an obstruction between the remote control and the sensor on the TV?
•
Replace the batteries.
•
Make sure that the remote control sensor is not exposed to direct sunlight.
No picture
•
Are all the connection cables to external signal sources connected correctly?
•
Is the connection cable to the external signal source damaged?
•
Have you selected the correct signal source on the TV set?
TV reception problems
No picture
•
Is the antenna plugged in properly? Is the antenna cable damaged?
•
Is the antenna cable plug firmly connected?
•
Have you selected the correct signal source on the TV set?
•
Have you already executed a channel search at your present location?
Poor picture
•
Is the antenna plugged in? Adjust the antenna.
•
Check that the channel is tuned properly.
•
Adjust the picture settings, such as brightness, color, and sharpness.
No sound
•
Is the sound muted? Press the
button.
•
Is the volume turned down? Press the
+ button.
No color
•
Adjust the color setting.
•
Check that the program is broadcasted in color.
Check that the channel is tuned properly.
Summary of Contents for U50H7S
Page 1: ...U50H 6 U55H 6...
