EN-12
Powering the TV set on and off
Powering on
Check that the TV is in standby mode. This means that the power cable must be connected
to a working power socket. Then press the Power button on the device or the
button on
the remote control to turn on the TV.
Powering off
To power off the TV, either press the Power button on the device or press the
button on
the remote control.
Notes:
If you press and hold the Power button or
standby button on the remote control for short
period of time, the TV will go into fully standby mode. When it is powering on again, the TV
will start from the original power on procedure.
After about 30 times of powering on & off, the TV will go into fully standby mode which
allows the TV to clear some temporary files for better performance.
Channel guide
Selecting the channel
1.
Press [
P
∧
] to select the next channel.
2.
Press [
P
∨
] to select the previous channel.
3.
If you know the channel number, enter it using the numeric keys to switch the channel
what you want.
4.
If you do not know the channel number, press [OK] to show the Channel list. Use the
[UP] & [DOWN] to scroll through the Channel list until the channel you want is selected,
then press [OK] to switch to this channel.
LCN (logic channel number)
1.
Press [MENU] to open the “TV options” menu.
2.
Press [LEFT] and [RIGHT] on the remote control, select the “Settings” option and press
[OK] to display the “Settings” submenu.
3.
Press [UP] and [DOWN] on the remote control, select the “Channel” to show “Channel”
subpage.
4.
Press [UP] and [DOWN] on the remote control, select the “Channels” option and press
[OK] to get in subpage.
5.
Press [UP] and [DOWN] on the remote control, select the “LCN” option and press [OK].
Off: do not use LCN for channel list, all channel ordered by system.
On: Use LCN for channel list, channel number is from stream.
Default: On/Off are defined by middleware which is determined by country and operators.
Summary of Contents for U50H7S
Page 1: ...U50H 6 U55H 6...
