background image

2

?

1

?

1

ISOFIX

installation

CAUTION!

 Do not place the restraint 

 

system  on a vehicle seat equipped with air bag! 

 

This may result in death or serious injury! 

Review  the  instructions  of  the  vehicle  for 

 

information about airbags and conditions of 

transportation of children.

SEAT POSITION OF THE CAR SEAT IN THE VEHICLE

          CORRECT

          NOT CORECT

         To be installed on this seat only if 

it is equipped with ISOFIX attachments.

    CORRECT FITTING/PROPER 

 

INSTALLATION

CAUTION!

 This child restraint is suitable for  

vehicles  which  are  equipped  with  ISOFIX  con-

nectors.

IMPORTANT:

 For groups 0+ and I the car seat 

must be installed using the ISOFIX system and 

support leg and  for groups II and III the car seat 

must be installed using the 3-point vehicle safety 

belt and the ISOFIX system.

 

CAUTION!

 NEVER LEAVE YOUR CHILD UNATTENDED!

 

CAUTION!

  DO  NOT  USE ANCHOR  POINTS  OTHER THAN THE  ONES  DESCRIBED  IN THIS 

 

  MANUAL AND MARKED ON THE RESTRAINT SYSTEM. 

 

CAUTION!

 NEVER INSTALL THE CHILD RESTRAINT IN THE DIRECTION 

 

  OF VEHICLE MOVEMENT AND FACING FORWARD BEFORE THE CHILD WEIGHT REACHES 9kg!

 

CAUTION!

 THE CAR SEAT SAFETY HARNESS MUST BE PROPERLY ADJUSTED ACCORDING 

 

  TO CHILD’S HEIGHT, NOT TWISTED AND SNUG WELL AGAINST BABY’S BODY.

 

CAUTION!

 THIS CHILD RESTRAINT SHOULD NOT BE MODIFIED OR ADAPTED WITH NEW 

 

  FITTINGS, WITHOUT PREVIOUS AUTHORIZATION BY THE COMPETENT AUTHORITY.

 

CAUTION!

 KEEP AWAY FROM FIRE!

  Installation in the vehicle and securing the child in the car seat to be done only by adult! 

Summary of Contents for LEGO























Reviews: