CAS 2700-15 Danfoss AK-SC-255 XML
Page
10
of
28
2016 Chipkin Automation Systems
, 3381 Cambie St- Box 211, Vancouver, BC, Canada, V5Z 4R3
Tel:
(866) 383-1657,
Fax:
(416) 915-4024
Website:
www.chipkin.com
3.4 Testing the Connection
After changing the IP Address, test the connection to the Gateway.
To test the connection, you can use one of two methods.
1.
Open a Web browser and type in the IP Address of the Gateway into the address bar.
2.
If the IP Setup Tool is still open, click on the Gateway in the ‘Select a Unit’ section and press the
‘Launch Webpage’ button. This will open a Web browser to the start page of the Gateway.
Regardless of the method, you will see the Start Here page of the Gateway. It should be similar to the
following:
Image 3.4 – CAS Gateway Start Here page
If this page is visible, then the connection to the Gateway is good and you can continue to the next step
– Section 4: Configuring the Gateway
