manualshive.com logo in svg

Chino IR-E, Instruction Manual, Page: 2 / 18

Share
Download
Chino IR-E Instruction Manual Download Page 2

INST.No.INE-508-P0

 

- Front 1- 

 

 

 

 

Installation contractor/distributors 

Provide this manual to the person who actually uses this product.   

 

 

Person who uses this product 

Correctly use this thermometer according to this manual. 
This manual is required for maintenance of this product, too. Store it until this unit 
is disposed.   
Should any unclear points arisen or any technical assistance be required, contact 
your sales agent of CHINO Corporation. 

 

     

Notices 

1. The contents of this manual are subject to change without notice.

 

2. Should any defects in bookbinding such as paging disorder, pages missing, etc., or any suspicious 

points, errors or omissions in the contents be found, contact your nearest agent of CHINO 
Corporation. 

3. The intellectual property rights of this manual belong to us.   

Do not disclose the contents of this manual, in part or in whole, to a third person without our 
permission. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Thank you for purchasing the IR-E series scanning radiation thermometer. 
Read this manual carefully to ensure that you use this product correctly and safely. 

Preface

 

Request to

 

Request to

 

Summary of Contents for IR-E



















Reviews:

No comments