INST.No.INE-555-P5
-6-
2.5 Warning and attention for the security
When you use this product, you follow the following matters by all means, and please use it definitely.
In addition, please keep this instruction manual carefully in the place that you can read anytime.
shows an act of the prohibition.
Warning (May cause death or serious injury)
Don’t operate this thermometer in places where combustible or volatile gas is
existed.
It is extremely dangerous to use the thermometer in such environment.
For the measurement of object exceeding 1500ºC, make sure to use the
eyepiece filter. However, when you feel glare on the measurement of objects
lower than 1500ºC, use the eyepiece filter (Model: IR-ZCLF).
When connecting power to the power terminals, make sure that all mains is
turned off to prevent an electric shock.
Don’t use the thermometer if it was broken, smoking or nasty smelling.
These may cause fire. For such abnormal condition, turn off the power switch
at once and contact your sales agent of CHINO Corporation.
Laser may damage your eyes. Don’t stare into a laser beam. Make sure to
target the laser when you want to decide the center of the measuring object
only and to go off it after the center of the measuring object is decided.
Never take the thermometer apart or convert it.
These may cause trouble and danger.
Caution (May cause injury or physical damage)
Be careful not to give vibration or impact to the thermometer. Install the
thermometer by keeping it as far as possible from an inductive oscillator or
electric power line.
Do not use the thermometer in dusty places, noisy places and static electricity
places.
Do not wire the connection cable near a noise occurrence resource, relay drive
line, high frequency line and power line.
Do not bundle the connection cable with the line that noise is doubling, and do
not store it into the same duct.
Read the entire contents in this instruction manual to have the thermometer function
perfectly.
！
！
！
！
！
！
！
！
！
！
！
