User Guide
Chiltern Invadex TransAqua Shower Chairs
2
Locate the right hand side frame (3) on
the cross bar, make sure the holes align
and snap home the grey securing pins (4)
from the front.
Safety Note: Check to ensure the
securing pins are fully inserted.
Apply brakes on rear wheels (5).
Place the backrest (6) over the spigot (7)
at the rear of the shower chair (make
sure the orientation of the backrest
is as shown).
Push the backrest into the frame
assembly until the holes are in line
and snap home the grey securing
pins (8).
Safety Note: Check to ensure
securing pins are fully inserted.
Note: Follow the drawings carefully
to ensure correct orientation.
Holding the left hand side frame assembly
of the shower chair (1) push the cross bar (2 )
into place. Make sure the holes align.
1
2
3
5
4
6
7
8
8
Assembly Instructions
Attendant Propelled Model
