User Guide
Chiltern Invadex TransAqua Shower Chairs
16
•
Wheel base adjustment
To change the wheelbase length e.g to set the
wheels back for increased stability, undo the
four screws on each clamp and remove each
wheel assembly in turn.
Rotate the large wheel clamp 180 degrees and
retighten the 4 screws.
wheel gap
•
Check the gap between the tyre and the frame to ensure the wheel is
tracked correctly.
500mm (20") wheel
gap = 28mm
560mm (22") wheel
gap = 44mm
610mm (24") wheel
gap = 38mm
Chair height adjustment - Self propelling wheels
(To be carried out by qualified personnel)
Note: Adjusting the self propelling wheels will require adjustment to the
position of the brakes.
•
Slacken the 4 clamp screws with a short reach 6mm Allen key
(available from Chiltern Invadex)
•
Slide the bracket and wheel assembly up or down to the desired height
•
Re-tighten the 4 clamp screws to secure wheel in place (below left)
•
The frame longitudinals must be horizontal after height adjustment
(below right)
Check level
