User Guide
Chiltern Invadex TransAqua Shower Chairs
14
Fig 1
•
Remove the castors using a short reach
8mm Allen key (available from Chiltern Invadex).
•
Reassemble with the leg extension pin in
position, as shown.
•
If the castors are replaced at any time, the
bolts should also be replaced at that time.
Locktite treated bolts are available as spare
parts. Please contact Chiltern Invadex for details.
Important safety notes:
All adjustment pins used must be of the same
length. Use only one adjustment pin for each
castor. Use thread locking fluid* to lock the
assembly securely. Ensure assembly is tight and
there is no gap between the spacer and the frame.
*Chiltern Invadex recommend ‘Nutlock 242 with Loctite
activator 7471’
Rotating the angle and adjusting the height of the footest
1. Loosen the Allen bolts as Fig 1 using a 6mm Allen key
(available from Chiltern Invadex).
2. Rotate the footrest to the desired angle as Fig 3 (to suit the user).
3. To adjust the height of the footrest loosen the footrest locking
knob, reposition the footrest at the desired height and retighten the
locking knob, see Fig 2.
4. Retighten the Allen bolts using a 6mm Allen key (available
from Chiltern Invadex).
Fig 3
Fig 2
Chair height adjustment - castors
(to be carried out by qualified personnel only)
