4
Watch the video guide at
support.chillx.co
1. Remove Foam Spacers
Remove the anti-shock foam spacers from the AutoEgg base and rails.
2. Ensure Sturdy Placement
Find a firm and level floor surface for the AutoEgg near an electrical outlet.
Avoid soft carpeted surfaces
— the automatic self-cleaning function fully
relies on four gravity sensors on the bottom of AutoEgg. If you have to put the
AutoEgg on carpet, please place a hard mat completely underneath the unit.
3. Plug the Type-Cable into the Base
Plug the USB Type-C cable into the socket on the bottom of the AutoEgg
base.
DO NOT
plug the AC/DC adapter into a wall outlet yet.
4. Add Litter
Add clumping litter into the litter tray. For the best tracking control and litter
saving, remain
in the middle of “Min” & “Max” line
. Never overfill.
DO USE
fast- and hard-clumping clay cat litter with small particles.
NEVER USE
silica gel crystals, recycled paper, tofu, pine, corn, or wheat litter.
5. Install the Liner
Put the litter drawer liner on the waste drawer drawer.
6. Attach the Top Cover
Align the tail end of the cover with the rear slot of the base.
Press downwards and inwards at the convex buckle.
7. Power the AutoEgg On
Plug the AC/DC adapter into a wall outlet. The cleaning rake of the AutoEgg
will be reset to the starting positing automatically.
Warning
: Whenever you add litter or move your AutoEgg, please unplug the
power plug for five seconds and then plug it back in to re-activate the auto-
matic self-cleaning function.
How to Set Up?
