•
the minimum radius of the hose is sufficient.
•
the rise for the condensation water pump is max. 500 mm.
•
you connect the unit to the sewerage with a stiff pipe (such as Cu or PVC).
•
you connect the pump hose tightly to the piping, so that the pressure
variations caused by the condensation water pump do not remove the hose
from the pipe. If necessary, use a seal.
Note! Do not push the hose too far into the sewerage pipe. The hose’s end should
be about 30–50 mm inside the seal.
•
you cut the hose to a suitable length.
Copyright © 2020. All rights reserved.
24 (45)
N02119031 Rev. A
GRAND Vari & Vari Pro – Installation, Operation, and Maintenance Manual
