15
1. Place all Climbing Wall Boards items #57, #58, #59, and
into pre-drilled holes as shown. Use a hammer or rubber
#58
#59
#62
ROCK WALL BOARD
HARDWARE INSTALLATION
PARTS NEEDED
#57
CLIMBING WALL BOARD (CENTER)
(4)
#58
CLIMBING WALL BOARD (SINGLE)
(5)
#59
CLIMBING WALL BOARD (DOUBLE)
(2)
#60
CLIMBING WALL BOARD (ROPE)
(1)
HARDWARE NEEDED
#62
3/8”-16 X 1/2” T-NUT
(14)
12
ROCK WALL
ASSEMBLY
#60 on a flat surface and install hardware items #63
mallet to gently tap hardware into place as needed.
HARDWARE NEEDED
#39
#8 X 2” FLAT HEAD WOOD SCREW
(66)
PARTS NEEDED
#01
LADDER SIDE
(2)
#29
CLIMBING WALL BACKBOARD
(1)
#57
CLIMBING WALL BOARD (CENTER)
(4)
#58
CLIMBING WALL BOARD (SINGLE)
(5)
#59
CLIMBING WALL BOARD (DOUBLE)
(2)
#60
CLIMBING WALL BOARD (ROPE)
(1)
46”
22 1/2”
#58
#58
#57
#59
#57
#58
#58
#57
#59
#58
#60
#01
#29
1. Lay items #01 as shown, measuring 46” from outside face
2. Measure 22 1/2" down from angled edge of items #01, arrange items,
#57,
#59, and #60 in order shown. Be sure that T-NUT #62 is facing
#58,
down when arranging Climbing Wall Boards.
(MAKE SURE ASSEMBLY IS SQUARE)
3. Attach items #29, #57, #58, #59, and #60 using hardware item #39.
(MAKE SURE ITEM #29 IS FLUSH WITH BOTTOM OF ITEM #60, AND CENTERED ON
PRE-DRILLED HOLES IN ITEMS #57, #58, #59, AND #60)
to outside face.
#39
START ON
THIS END
15
