8
MAINTENANCE, CLEANING, AND STORAGE
MAINTENANCE:
Upon completion of the assembly, check to make sure all screws, bolts and connectors are tightened and secure.
Periodically check crib for damaged hardware, loose joints, missing parts or sharp edges before and after assembly
and frequently during use.
DO NOT use crib if any parts are missing or broken.
If any parts are missing, broken or you need assistance DO NOT return crib to your dealer.
Call Child Craft at 330.723.0599 and include model identification numbers recorded on page 1.
DO NOT substitute parts.
CLEANING:
Mix a mild solution of gentle dishwashing soap and water, apply to surface using a clean cloth lightly dampened in
the solution. Rinse well with clear water using a soft clean cloth, then dry all surfaces with a soft dry cloth.
DO NOT use abrasive cleaners or any cleaners with harsh chemicals that would contact a child’s skin, scouring
pads, steel wool or coarse rags. This crib should be treated the same as any fine furniture.
STORAGE:
When storing crib use caution as extreme temperature or humidity changes could be harmful.
Use caution when a vaporizer is in use. Always aim vapor stream away from crib as well as away from any wood
furniture item.
After completing the assembly, the user is advised to read and be aware of
ALL WARNINGS, CAUTIONS, CLEANING, STORAGE USE, AND MAINTENANCE notices in these
directions and printed on the storage pouch on the crib spring. A printed pouch is attached to
the crib spring for the permanent storage of the assembly directions. Please place the complete set
of assembly directions into the pouch for future referral. We caution the user to not place excess
hardware in the pouches as it could present danger to the child if retrieved.
FULL SIZE BED CONFIGURATION
C x 1
S x 1
T x 4
U x 4
C
S
U x 2
T x 2
U x 2
T x 2
AB20493_G13
Shop for Your Crib’s Matching
Bed Rails
ATTENTION: THE FOLLOWING HARDWARE NEEDED FOR THE FULL SIZE
BED CONVERSION ARE NOT PROVIDED BY CHILD CRAFT, BUT MAY BE
PURCHASED AT YOUR LOCAL HARDWARE STORE.
S. Full Size Hollywood Style Bed Frame.
T. 1/4”-20 x 3” Long Bolts.
U. 1/4”-20 Nuts.
Align Hollywood Bed Frame with holes in Headboard (C). Insert Bolts (T)
Through Headboard (C) and Bed Frame.
