6
CCH02703:12/99
D
IRECTIONS
FOR
C
ONVERTING
“C
RIB
”
TO
A
“D
AYBED
”
D
IRECTIONS
FOR
C
ONVERSION
TO
A
“F
ULL
S
IZE
H
EADBOARD
”
When use as a crib has been completed, you have the option to
convert to a daybed for years of additional use in your child’s room.
Refer to Step 6 - Diagram 6 and follow direction is reverse order.
Store the removed parts and hardware in the event you wish to
convert your daybed back to a crib. Refer to Sketch A.
Sketch A
(style may vary)
Disassemble crib by first removing the drawer. Store the drawer
without disassembly. Perform Step 6, 5, 4 & 3 in reverse order to
remove the Stationary Side
KK
KK
KK
KK
KK
from the other crib parts.Attach
the Stationary Side to a Hollywood style full size bed frame at the
location of the mounting cleats (Hardware is not provided). See
Diagram 8 and Sketch B. Insert the Hole Button Covers
M
as
shown.
Sketch B
(style may vary)
D
IAGRAM
8
Receiving holes for Hole Button Covers
M
Receiving holes for Hole Button Covers
M
K
K
Mounting Cleats
(Cleats are flush with the face that the
purchased Hollywood Frame mounts to.)
MAINTENANCE OF YOUR CHILD CRAFT CRIB/DAYBED/FULL SIZE HEADBOARD: Upon completion of assembly be sure all screws, bolts
and fastening devices have been tightened securely. A frequent check should be made of all screws, bolts and fastening devices and
tightened if needed. Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges.
DO NOT use crib if parts are missing or broken. Contact your Dealer or Child Craft (812) 883-3111, [email protected] for a
replacement part or instructional literature if needed. Include Model Identification Number with your request which you recorded on
page 2 of these instructions. DO NOT SUBSTITUTE PARTS. DO NOT MAKE ANY ALTERATIONS NOT DESCRIBED IN THESE ASSEMBLY
DIRECTIONS.
CLEANING INSTRUCTIONS FOR YOUR CHILD CRAFT CRIB/DAYBED/FULL SIZE HEADBOARD: Mix together a mild solution of gentle
dishwashing liquid and water, apply to surface using a soft clean cloth lightly dampened in the solution. Rinse with clear water again
using a soft clean cloth, then dry all surfaces thoroughly with a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS, STEEL
WOOL, OR COARSE RAGS SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
STORAGE AND USE OF YOUR CHILD CRAFT CRIB/DAYBED/FULL SIZE HEADBOARD: A printed plastic pouch is attached to the crib spring
for the permanent storage of the assembly directions. After completing the assembly process you are advised to read and be aware of
all WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND MAINTENANCE notices contained in this set of directions and printed on the
plastic pouch located on the underneath side of the crib spring. You will then place the complete set of assembly directions into the
plastic pouch for future referral by opening storage drawer. We caution you not to place excess hardware in the plastic pouch as it could
present danger to a child if retrieved. When storing crib use CAUTION as extreme temperature or humidity changes could be harmful.
Use CAUTION when a vaporizer is in use, always aim vapor stream away from crib as well as away from any wood furniture item.
(style may vary)
Assembled Crib
(style may vary)
K
K
J J
I I
L
L
G
G
D
D
Purchased Mattress
(see size requirements on
page 7 under CAUTION)
W
HENEVER
DISASSEMBLING
CRIB
, DO NOT
REMOVE
ANY
ITEM
ATTACHED
WITH
WOOD
S C R E W S
A
A
A
A
A
,
C
C
C
C
C
,
E
E
E
E
E
,
K
K
K
K
K
,
S
S
S
S
S
,
T
T
T
T
T
O R
W
W
W
W
W
.
