Chike e-cargo, Operating Instructions Manual

Page: 34 / 60

26
A
B
C
D
E
Please write down the
key number of the battery
lock in the respective line
of your
b a
passport on page
41. The number is imprinted on the
key. Having the number you can
contact your dealer to apply for a
replacement key in case of loss.
When detached from
b a
the battery
can be charged using the battery charger
with the supplied plug adapter. More
details are provided in the original
instructions provided by Shimano which
came with your
b a
.
The used batteries
store a lot of energy.
Observe all operating
and warning instructions of the
enclosed instructions of the battery
manufacturer to avoid any danger.
Pay particular attention to the
instructions on the label of the
supplied charger.
The battery has a battery level indication
4 , fig. 10, p. 25 consisting of five
lamps. When the system it powered
on the lamps indicate the battery
level. When the system is powered
off or the battery is released first
press the button 3 , fig. 10, p. 25 to
switch on the battery level indication
Battery level Display
0-20%
◦ ◦ ◦ ◦ ◦
20-40%
• ◦ ◦ ◦ ◦
40-60%
• • ◦ ◦ ◦
60-80%
• • • ◦ ◦
80-100%
• • • • ◦
100%
• • • • •
Various other flashing and lighting
patterns indicate possible malfunction.
Details can be found in the enclosed
instructions of the drive system.
Assist level
The electric drive
system provides four assist levels, OFF ,
ECO , NORMAL and HIGH . In mode ECO
the pedalling support by the electric
motor is lowest while in mode
HIGH
you get maximal support. In mode OFF
the electric assistance is switched off,
however the system is still running, i.e.
the display shows information, the lights
can be switched on and the electric gear
shift is working. You can switch between
the various assist levels using the buttons
on the shift unit 4 , fig. 8, p. 24 located
at the left hand side of the handlebars.
Pressing the button 2 , fig. 11, p. 25
increases the assist mode, pressing
button 3 , fig. 11, p. 25 decreases the
assist mode finally turning off the electric
assistance.
Gear shift
Shifting the gears is done
with the shift unit 5 , fig. 8, p. 24 located
on the right hand side of the handlebars.
Details can be found in section section
Gear shift
D
p.19.
Walk assist mode
To activate
the walk assist mode, first turn off the
electric assistance. (assist mode
OFF ).
Then pressing the button 3 , fig. 11,
p. 25 for a few seconds activates the
walk assist mode. In walk assist mode,
pressing button 3 , fig. 11, p. 25 turns
on the motor, without having to apply
a torque to the crank set, thus assisting
you to walk your
b a
at low speeds.
Pressing the button 2 , fig. 11, p. 25
exits the walk assist mode.