Chike e-cargo, Operating Instructions Manual

Page: 20 / 60

12
A
B
C
Be sure to release the
tilt lock before driving!
Driving with a blocked
tilting mechanism can damage your
b a
and will lead to uncontrollable
driving behaviour resulting in serious
accidents!
Screw connections
Make sure all screws are properly
tightened. Noise or unusual driving
behaviour may indicate loose screws
.
In the early stage after assembly, it is
possible that screw connections still
loosen. Your dealer will check this
within the first inspection and tighten the
screws to the correct tightening torques
if necessary. Afterwards the screws
should not loosen . If this happens
anyhow, please have the reason checked
by your dealer!
Loosened or insufficiently
tightened screws can
damage your
b a
and
cause serious accidents!
Frame and chassis
Make sure that all frame and chassis parts
have no visible damage such as cracks
or bumps! If you notice any damage, let
your dealer check and repair your
b a
before using it again.
Damaged components
can suddenly fail during
your ride and thus lead to
serious accidents!
Cabin
Is the fabric of the cabin undamaged?
Is the belt system properly fixed to the
cabin? Do the straps show no signs of
damage or wear?
Loading
The correct loading is a basis for a
comfortable and safe handling. On the
one hand the load securing is important.
On the other hand, care must be taken
to distribute children and loads as even
as possible, so that the
b a
does not
tilt too much on one side.
A maximum of two
children may be carried.
Children must always be
strapped and wear a bicycle helmet.
The carried children must not be
older than 7 years.
Pay attention to a
symmetrical distribution
of the loads. When
transporting a single child, it should
be strapped in the middle position.
When transporting loads
they must be secured by
straps or the like so that
they remain in place in the case of
extreme driving situations, such as an
emergency braking.