Instruction Manual
SLB-9000
3
INSPECT THE BRACKET AND ATTACHING HARDWARE BEFORE INSTALLING
1. Carefully inspect the SLB-9000 for shipping damage. If any
damage is apparent, call your carrier claims agent and do not
continue with the installation until the carrier has reviewed the
damage.
NOTE:
Read all instructions before starting installation.
2. Lay out components to ensure you have all the required parts
before proceeding (see “PARTS” on page 8).
SELECT PROJECTOR MODEL AND DETERMINE PARTS
This interface bracket is designed to fit a wide variety of projector models. Study the following information carefully to select the
proper hardware and assembly procedures for your specific projector model. To determine the correct hardware and procedures,
perform the following:
1. Using Table 1 on page 4, locate your projector model.
2. Note and record the group letter for your projector model.
NOTE:
Not all hardware will be used for every installation. Do not discard extra hardware until installation is complete.
3. Using the group number determined in Step 2, proceed to
“BRACKET INSTALLATION PROCEDURES” on page 5
and follow the instructions for your projector model
