Installation Instructions
RSME
9
1d
Ø 6.3mm
(Ø 1/4”)
64mm
(2-1/2”)
Concrete Installation
NOTE:
CPA adapter must be removed prior to installing
RSME to concrete. See Section 1a for details.
1.
Determine mounting location.
WARNING:
The RSME is designed to be mounted to
a concrete ceiling with a minimum thickness of 8" and a
maximum drywall covering of 5/8".
WARNING:
IMPROPER INSTALLATION CAN
RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! Structural members
MUST
be capable of supporting five times the combined weight
of all equipment being mounted.
2.
Using the RSME as a guide, mark four mounting hole
locations on ceiling using a pencil or similar tool.
3.
Drill four 1/4" (6.3mm) dia. pilot holes to a depth of
2-1/2" (64mm) deep.
4.
Align four mounting holes in RSME with four pilot
holes.
IMPORTANT ! :
Make sure mount is properly
oriented towards target before securing to
structure.
WARNING:
Anchors (not provided) must be installed
into structurally sound solid concrete. Installation into
hollow concrete block, mortar, or concrete that exhibits
cracking, spalling, or other defects may result in failure
of anchor and serious personal injury or damage to
equipment.
5.
Install four 3/8" x 2-1/4" concrete anchors (not
included) by inserting into pilot holes and pounding in
until flush with mounting surface.
6.
Secure RSME to structure using four #10 flat washers
and four #10 x 3" Phillips head wood screws (not
included).
(A)
3
x 4
x 4
1
2
5
x 4
6
x 4
4
