INSTALLATION INSTRUCTIONS
07/27/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]
PSM-2132
1. Attach four mounting buttons to display using four M8 x 35mm button head cap screws provided
(see Figure 5
).
Use longer screws for screens with deep recessed threaded holes.
2. Secure latching flag to Plasma Static Mount using one 10-24 x .5 FH undercut screw, one Nylon
washer, and one 10-24 Nylock nut (see Figure 6).
3.
Securely anchor the plasma static mount to the wall using wall studs or supporting framework
(see
Figure 7).
4. Make sure the flag is lowered to the side before attempting to place the display on the mount.
5.
With the aid of another person, lift the display up to the mount, align the mounting buttons on the display
with the teardrop slots in the mount, and set the display into place.
6. Position (raise) the flag
to secure the display.
Mounting Button
Locations
Align Mounting
Buttons with
Teardrop Slots
Anchor to wall
using four slots
Figure 5
Figure 7
Figure 6
10-24 Nylock Nut
installed from underside
Latching Flag
(Note outer
hole location)
Nylon Washer
between flag & mount
10-24 x .5 FH
Undercut Screw
