INSTALLATION INSTRUCTIONS
07/27/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]
PSM-2131
1.
Attach six mounting buttons to display using six M8 x 35mm button head cap screws
provided (see Figure 2).
2. Secure latching flag to Plasma Static Mount using one 10-24 x .5 FH undercut screw, one Nylon
washer, and one 10-24 Nylock nut (see Figure 3).
3.
Securely anchor plasma static mount to the wall using wall studs or supporting framework (see Figure 4).
4. Make sure the flag is lowered to the side before attempting to place the display on the mount.
5.
With the aid of another person, lift the display up to the mount, align the mounting buttons on the display
with the teardrop slots in the mount, and set the display into place (see Figure 4).
6. Position (raise) the flag
to secure the display (see Figure 4)
Figure 2
Mounting Buttons
Align Mounting
Buttons with
Teardrop Slots
Anchor to wall
using four slots
Figure 4
Figure 3
10-24 Nylock Nut
installed from underside
Nylon Washer
between flag & mount
10-24 x .5 FH
Undercut Screw
Raise Flag
