background image

Plasma Presenters Cart
(PPC-2000)

Chief Manufacturing, a division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN  55378

P: 800.582.6480 / 952.894.6280  F: 877.894.6918 / 952.894.6918

8809-000001 Rev. I

2008 Milestone AV Technologies

www.chiefmfg.com

10/08

BEFORE YOU BEGIN

CAUTION:  To prevent damage to the Plasma Presenters Cart, which could affect or void the Factory war-
ranty, thoroughly study all instructions and illustrations before you begin to install or operate the unit.

The maximum weight to be installed on the PPC is 200 pounds (90.7 Kg).

I N S T R U C T I O N      M A N U A L

The Plasma Presenters Cart (PPC) is designed to assist
the presenter in showrooms, boardrooms, and trade
show exhibits. The PPC provides agile mobility for
screens weighing up to 200 pounds while furnishing safe,
stable support.

The attractive cart base is constructed of rugged 2.5”
diameter steel tubing with optional smoked acrylic acces-
sory shelves. Access holes, to conceal unsightly equip-
ment cords or cables, are provided at several locations in
the base. The standard two 4” twin wheel casters and
two locking casters make movement easy yet prevent
accidental movement of the screen.

The universal mounting plate accepts all Chief PSB
mounting brackets. The 2” incremental height adjustment
facilitates optimum viewing for most settings.

Summary of Contents for PPC-2000







Reviews: