Installation Instructions
OLCB1U
7
Attaching Interface Brackets to Display
1.
Lower the latch mechanism on each interface bracket (L).
(See Figure 4)
Figure 4
2.
Align the center of the interface bracket (L) with center of
screen. (See Figure 5)
NOTE:
The diamond-shape hole in the bracket corresponds to
the center of the mount.
Figure 5
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Properly sized
screws will easily and completely thread into display
mounting holes. If spacers are required, be sure to use longer
screws of the same diameter.
3.
Select correct screws, spacers (if necessary) and universal
washers from the hardware bag (A-G) and attach brackets
(L) to back of screen. (See Figure 5)
Attaching Display to Ceiling Mount
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the mounting system of the
OLCB1U mounts does not exceed 250 lbs (113.4 kg) total or
125 lbs (56.7 kg) per display.
1.
Ensure that the latch mechanisms on interface brackets (L)
are already lowered. (See Figure 4)
2.
While supporting both sides of display, lower display onto
ceiling mount, hooking top of interface brackets onto front of
ceiling mount. (See Figure 6)
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! The display MUST
be centered on the ceiling mount.
3.
Raise the latch mechanism on both interface brackets to
lock bracket in place. (See Figure 6)
Figure 6
(L) x 2
1
Latch
mechanism
Center of
bracket
(E or F) x 4
(A-D) x 4
(L) x 2
3
2
(G) x 4
(if necessary)
2
3
Latch
mechanism