Installation Instructions
MTMP1U
9
3.
If necessary, the interface bracket knobs may be switched
to allow the brackets to be reversed. (See Figure 8)
a. Remove display from mount.
b. Remove brackets from display.
c. Hold the right interface bracket horizontally, tightly
gripping it so that spacers do not move.
d. Remove the knob, washer and screw.
e. Replace the knob, washer and screw in the opposite
order, with the knob on the inside of the bracket.
f. Switch the right interface bracket to the left side of the
wall mount.
g. Repeat Steps 3c through 3f with the left upright bracket.
Figure 8
Attaching Display to Wall Mount
NOTE:
NEVER place both interface brackets (X and Y) to one
side of the wall mount center line! (See Figure 9)
NOTE:
Do NOT allow both interface brackets (X and Y) to be
located on same side of wall mount. (See Figure 9)
Figure 9
3e
Knobs to outside
of brackets
3d
Center line (CL)
Both interface brackets must NEVER be located
to one side of the wall mount brackets!
NEVER place both interface brackets to one
side of the wall mount center line (CL)!
