Installation Instructions
MTMP1U
11
Tilt
The interface brackets (X and Y) allow from -5° to 12° tilt, and
can be locked at 0°, 6° and 12°.
1.
Loosen the interface bracket knob.
2.
Adjust tilt as required. (See Figure 13)
3.
The tilt may be locked at 0°, 6° or 12° using one 1/4-20 x 1"
round head carriage bolt (V) and one 1/4-20 hex nut (W) per
interface bracket. (See Figure 13)
4.
Tighten interface bracket knob.
Figure 13
Locking Interface Brackets (Optional)
1.
Lock interface brackets onto mount rails using one
3/8-16 x 3/4" set screw (U) on each interface bracket. (See
Figure 14)
Figure 14
Locking Mount (Optional)
1.
Add padlock (not included) to interface bracket to complete
security. (See Figure 19)
NOTE:
The padlock maximum shackle diameter is 5/16"
(7.9 mm).
Figure 15
Latch in
CLOSED
position
3
(W)
2
Interface
bracket
knob
(V)
Lock at 12° tilt
Lock at 6° tilt
1
4
Lock at 0° tilt
1
(U) x 2
1
Padlock shackle
- 5/16" (7.9mm)
maximum diameter:
