Installation Instructions
MSP-WL4C
9
3.
Position handle (K) at desired height and secure by
tightening button head cap screws attaching handle
brackets to array. (See Figure 11)
Figure 11
Adjustments
DUAL / TRIPLE DISPLAY
1.
LATERAL POSITION ON ARRAY:
•
Using your fingers, slightly loosen adjustment knob "A".
•
Slide display to desired position.(See Figure 12)
•
Using your fingers, tighten adjustment knob "A".
Figure 12
2.
PITCH / YAW / ROLL:
•
Using your fingers, slightly loosen adjustment knob "B"
(See Figure 12).
•
Adjust display as desired.
•
Using your fingers, tighten adjustment knob "B".
Array Bar Roll Adjustment
1.
Loosen roll adjustment screws on back of array bracket.
(See Figure 13)
2.
Adjust roll of array bar as desired. (See Figure 13)
3.
Tighten roll adjustment screws on back of array bracket.
(See Figure 13)
Figure 13
3
3
3
x 4
A
B
1
3
2
2
