MSP-WL4
Installation Instructions
8
For recessed mounting hole installation:
•
Place four spacers (D) on top of mounting holes
on back of display. (See Figure 7)
•
Using Phillips screwdriver, carefully install four
M4x25mm screws (C) through corresponding
holes on faceplate, spacers (D) and into the
mounting holes on the display. (See Figure 7)
Figure 7
4.
Position display with faceplate attached above mount. (See
Figure 8)
5.
Slide faceplate onto mounting head until quick release tab
clicks into place. (See Figure 8)
Figure 8
Handle Installation
1.
Loosen four screws securing handle brackets to array arm
(E). (See Figure 9)
2.
Install uprights of handle (F) into handle brackets located on
the back of array arm (E). (See Figure 9)
Figure 9
3.
Position handle (F) at desired height and secure by
tightening button head cap screws attaching handle
brackets to array. (See Figure 10)
Figure 10
(for recessed mounting holes)
(C) x 4
(D) x 4
quick release
faceplate
3
5
2
(F)
1
x 4
(E)
2
(F)
3
3
3
x 4
