Installation Instructions
MSP-WL4
9
Adjustments
Rotational Adjustment
NOTE:
(Optional) Rotational adjustment may be locked by
installing rotational locking screw (X) into back of
faceplate. (See Figure 11)
Figure 11
1.
The monitor may be adjusted 90 degrees in either direction
in order to provide a portrait view of the monitor. (See Figure
12)
2.
Use Phillips screwdriver to adjust rotational adjustment
screw to adjust rotational tension. (See Figure 12)
Figure 12
Display Adjustments
1.
Loosen knobs securing faceplates to array. (See Figure 13)
2.
Slide displays laterally on array to adjust lateral shift. (See
Figure 13)
3.
Adjust pitch and pivot position as desired. (See Figure 13)
4.
Tighten knobs to secure faceplates in position. (See Figure
13)
Figure 13
Array Bar Roll Adjustment
1.
Loosen roll adjustment screws on back of array bracket.
(See Figure 14)
2.
Adjust roll of array bar as desired. (See Figure 14)
3.
Tighten roll adjustment screws on back of array bracket.
(See Figure 14)
Figure 14
(X)
1
1
rotational adjustment
screws
2
2
3
2
1
4
3
3
3
1
2
2
3
