Installation Instructions
MSP-SPCM
7
MOUNTING PROCEDURES
1. Thread the mount onto the 1 1/2”NPT pipe extension/cou-
pling you have provided.
2. Read and follow the hanging bracket instructions
(PSB-2095) for your application (display model).
3. Make sure the mount is level (see “ADJUSTMENTS” on
page 8, Roll) and latch is positioned so it will not obstruct
plasma installation (see Figure 7).
4. With one person supporting each side of the display, align
the four Q-latches with the four openings.
5. Secure the display by completely engaging the latch.
6. Lock the display in place by installing a Q-clamp on each
side of the bottom of face plate as shown in Figure 8.
7. Connect and secure power/audio/video cables.
Q-latch
PSB-2095
Latch
to
secure
your
display
Figure 7. Mounting
Q-Latch
Q-Clamp
Figure 8. Install Q-Locks
