4
Installation Instructions
MSP-SPCM
PARTS
1
3
9
8
2
10
4
5
7
6
11 12
14
15
16
ASSEMBLY PROCEDURE
1. Remove two adjustment screws that are not securing the
tube and open the body assembly by raising the tube, piv-
oting it on the tilt adjustment screws (see Figure 1).
2. Secure the tube using the two adjustment screws removed
in step 1.
3. Using four 5/16-18 button head cap screws and four wash-
ers, secure the body to the plate assembly (see Figure 2).
Tilt Adj. Screw
Remove and
Reinstall Here
after tube is raised
Body Assembly
Plate Assembly
Figure 1. Raise tube of Body
Figure 2. Assemble Body to Plate
