Installation Instructions
MSP-DCCUST1
9
2.
Lift short throw projector arm (A) up to wall plate (B) and
place projector arm slots over wall plate hooks. (See
Figure 11)
Figure 11
3.
Fasten short throw arm (A) to wall plate (B) using two
1/4-20 x 3/4" button head cap screws (HD). (See Figure 12)
Figure 12
Projector Installation
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the weight of the
projector does not exceed 25 lbs (11.3 kg).
1.
Insert and slightly tighten three M4 x 10mm Phillips pan
head screws (HA) into the projector threaded inserts. (See
Figure 13)
Figure 13
2.
Raise the projector up to the projector arm and slide three
screws into slots on the projector arm. (See Figure 14)
3.
Add one remaining M4 x 10mm Phillips pan head screw
(HA) through the projector arm and into the projector. (See
Figure 14)
4.
Tighten all four fasteners.
Figure 14
5.
Slide projector along short throw projector arm until image
is the correct size on screen.
2
(A)
Projector arm slots
Wall plate hook
(G)
(B)
3
(HD) x 2
Back of
projector
1
(HA) x 3
2
3
(HA) x 1
Projector
Summary of Contents for MSP-DCCUST1
Page 103: ...คำแนะนำการติดตั ง 103 ...
