Installation Instructions
3
TOOLS REQUIRED FOR INSTALLATION
•
Phillips Screwdriver, #1 and #2
•
2.5mm Hex Key (included with desk mount)
NOTE:
Other tools may be required depending on your
method of installation.
PARTS
After unpacking carton, inspect and verify contents (See
Figure 1). If any listed parts are missing or damaged,
contact Chief Customer Service at 1-800-582-6480.
Figure 1: Parts
DESK MOUNT DISASSEMBLY
1.
If previously attached, disconnect cables from
display, then remove display. See instructions
included with desk mount.
2.
If previously attached, loosen clamp attach screw
(See Figure 2). Remove desk mount from desk.
Figure 2: Remove Desk Mount
3.
Using 2.5mm hex key, remove base plate and attach
screws from desk mount housing (See Figure 3).
NOTE:
Base plate and attach screws will not be reused
in MSP-DARAC1B installation.
Figure 3: Remove Base Plate
Table 1: Parts
Item
Description
Qty
10
BRACKET, Top Down Desk Mount
1
20
SCREW, Phillips Pan Sheet Metal, #10 x 1-1/2"
3
30
WASHER, Flat, Machine, #10
3
40
SCREW, Phillips Flat Machine, M4 x 12mm
3
MOUNT, Desk (required; not included)
1
20
30
40
10
Clamp attach
screw
Base Plate
Attach Screws
(3 places)
Desk mount
housing
