background image

 MSP-CSH1

Installation Instructions

2

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and 
subsidiaries (collectively "Milestone"), intend to make this 
manual accurate and complete. However, Milestone makes no 
claim that the information contained herein covers all details, 
conditions or variations, nor does it provide for every possible 
contingency in connection with the installation or use of this 
product. The information contained in this document is subject 
to change without notice or obligation of any kind. Milestone 
makes no representation of warranty, expressed or implied, 
regarding the information contained herein. Milestone assumes 
no responsibility for accuracy, completeness or sufficiency of 
the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies. 
All rights reserved.

 IMPORTANT WARNINGS AND 

CAUTIONS!

WARNING:  

A WARNING alerts you to the possibility of 

serious injury or death if you do not follow the instructions.

CAUTION:  

A CAUTION alerts you to the possibility of 

damage or destruction of equipment if you do not follow the 
corresponding instructions.

WARNING:  

Failure to read, thoroughly understand, and 

follow all instructions can result in serious personal injury, 
damage to equipment, or voiding of factory warranty!  It is the 
installer’s responsibility to make sure all components are 
properly assembled and installed using the instructions 
provided.

WARNING:  

Failure to provide adequate structural strength 

for this component can result in serious personal injury or 
damage to equipment!  It is the installer’s responsibility to 
make sure the structure to which this component is attached 
can support five times the combined weight of all equipment.  
Reinforce the structure as required before installing the 
component.

WARNING:  

RISK OF ELECTRIC SHOCK ! Using the 

wrong screws could result in severe personal injury or 
damage to your display. Only use the screws provided 
to connect display to MSP-CSH1.

WARNING:  

Exceeding the weight capacity can result in 

serious personal injury or damage to equipment!  It is the 
installer’s responsibility to make sure the combined weight of 
all components installed within and attached to the MSP-
CSH1 does not exceed 25 lbs (11.34 kg). The weight of the 
display attached to the MSP-CSH1 also cannot exceed 25 lbs 
(11.34 kg). 

DIMENSIONS

18.66

EXTERNAL WIDTH

474

18.16

INTERNAL WIDTH

461

15.48

18.66

474

19.28

490

15.48

393

8.22

TOTAL DEPTH

209

Summary of Contents for MSP-CSH1









Reviews: