LW46/47/48/49/50/55UxP
Installation Instructions
14
10. Flip and install latch section on left side of wall bracket.
NOTE:
Be sure that upper and lower tabs are slid into slots on
wall bracket. (See Figure 17)
11. Fasten in place with two washers and screws removed in
Step 1. (See Figure 17)
12. Re-install small horizontal tab removed from bottom of latch
section in Step 1, by fastening it onto the top of the latch
section. (See Figure 17)
13. Re-install outside latch using fastener removed in Step 1.
(See Figure 17)
14. Re-install inside latch: (See Figure 17)
a. Place spring on top of horizontal tab and compress
spring slightly.
b. Place latch over spring, lining up tabs on latch with slots
in wall bracket.
c. Fasten latch in place with button head cap screw and
washer removed earlier in Step 1.
Figure 17
Tabs
x 2
11
Insert tab
at top and
into slot
bottom
10
12
Horizontal tab
13
Wall bracket
14a
14b
14c
x 1
Slots
Spring
