LCB2X1U / LCB2X1UP
Installation Instructions
12
2.
Align the center of the interface bracket (DD) with center of
display. (See Figure 6)
NOTE:
The diamond-shape hole in the bracket corresponds to
the center of the mount.
Figure 6
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Properly sized
screws will easily and completely thread into display
mounting holes. If spacers are required, be sure to use longer
screws of the same diameter.
3.
Select correct screws, spacers (if necessary) and universal
washers from the hardware bag (A-N) and attach brackets
(DD) to back of displays. (See Figure 6)
Attaching Displays to Ceiling Mount
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! The displays MUST
be located equal distance from the column on each end and
side of the ceiling mount.
IMPORTANT ! :
Install displays by placing the first
display on the mount, and then adding the second display
on the other side of the mount at the opposite end of the
mount. Repeat for remaining displays. (See Figure 7)
1.
Ensure that the latch mechanisms on interface brackets
(DD) are already lowered. (See Figure 5)
2.
While supporting both sides of display, lower display onto
one side of ceiling mount, hooking top of interface brackets
onto rail of ceiling mount. (See Figure 8)
3.
Raise the latch mechanism on both interface brackets to
lock display in place. (See Figure 8)
Figure 7
Figure 8
4.
Fasten bracket against ceiling mount extrusion using one
10-24 x 5/8" button head cap screw (Y). (See Figure 9)
5.
Repeat for other interface bracket.
Figure 9
6.
Repeat Steps 1 through 5 for remaining displays.
bracket
(N)
(L or M)
(A-K)
(DD)
3
2
Center of
1
4
3
2
2
3
3
Latch
mechanism
4
(Y) x 2
5
