Installation Instructions
K4G210-310
7
10. Loosely install two 1/4-20 x 1/2” socket head carriage
screws (B1) through mounting holes on column arm (Z)
bracket and into 1/4” square nuts (B2). (See Figure 5)
11. Slide column arm (Z) bracket into column (CC) until desired
mounting height is reached. (See Figure 5)
Figure 5
12. Tighten two 1/4-20 x 1/2” socket head carriage screws (B1)
to secure column arm (Z) at desired height. (See Figure 6)
13. Install column cap (K) to column (CC). (See Figure 6)
Figure 6
14. Use two 3/8-16 x 2 3/4” socket head carriage screws (A1)
and two 3/8” lock nuts (A2) to secure left array arm (X) and
right array arm (Y) to array center (AA or BB). (See Figure 7)
Figure 7
15. Hang array center (AA or BB) onto column arm (Z)
faceplate. (See Figure 8)
Figure 8
16. Use two #10-32 x 3/8” button head cap screws (D2) to
secure column arm (Z) to array center (AA or BB). (See
Figure 9)
(B1) x 2
10
11
(B2) x 2
(Z)
(CC)
(B1) x 2
12
13
(K)
(Z)
(A1) x 2
14
(A2) x 2
(K4G210 shown)
(Z)
(AA)
(K4G210 shown)
faceplate
15
tab
mounting
