K4G210-310
Installation Instructions
10
5.
Slide two remaining selected spacers (Q or R) in between
faceplate and display, positioning them over the
lower
two
mounting holes. (See Figure 16)
6.
Install two remaining selected screws (N or M) through
lower
two mounting holes on faceplate, selected spacers (Q
or R) into the
lower
mounting holes on the display. (See
Figure 16)
Figure 16
7.
Tighten all four screws. Do not over-tighten!
Adjustments
Pivot Adjustment (Array Arm)
1.
Array arms may pivot toward the front of mount up to 20° per
arm. (See Figure 17)
2.
When arms are at desired pivot position, lock pivot position
by tightening 3/8-16 x 2 3/4” socket head carriage screws
(A1) using 5/16” hex key (E5). (See Figure 17)
Figure 17
Pivot Adjustment (Column Arm)
1.
Use handle to extend or collapse column arm (Z) as
desired. (See Figure 18)
2.
(Optional) Loosen or tighten column arm pivot tension
screws as desired to increase or decrease pivot tension.
(See Figure 18)
Figure 18
Height Adjustment
1.
Loosen 1/4-20 x 1/2” socket head carriage screws (B1)
holding column arm (Z) to column (CC). (See Figure 19)
2.
Adjust column arm to desired height. (See Figure 19)
3.
Tighten 1/4-20 x 1/2” socket head carriage screws (B1) to
lock column arm’s position. (See Figure 19)
Figure 19
(Q or R) x 2
(N or M) x 2
6
faceplate
(array arm not
shown for clarity)
(A1) x 2
2
arm extended
arm collapsed
pivot tension
screws
2
1
3