K2P Series
Installation Instructions
10
3.
Position handle (J2) at desired height and secure by
tightening button head cap screws attaching handle
brackets to array. (See Figure 10)
Figure 10
Adjustments
Portrait Adjustment (K2P22H Models only)
1.
The monitor may be adjusted 90 degrees in either direction
in order to provide a portrait view of the monitor. (See Figure
11)
2.
Use 1/8” hex key (M) to adjust rotational adjustment screw
to adjust rotational tension. (See Figure 11)
Figure 11
Adjustments - K2P22H models only
1.
Loosen knobs securing faceplates to array. (See Figure 12)
2.
Slide displays laterally on array to adjust lateral shift. (See
Figure 12)
3.
Adjust pitch and pivot position as desired. (See Figure 12)
4.
Tighten knobs to secure faceplates in position. (See Figure
12)
Figure 12
Array Bar Roll Adjustment
1.
Loosen roll adjustment screws on back of array bracket.
(See Figure 13)
2.
Adjust roll of array bar as desired. (See Figure 13)
3.
Tighten roll adjustment screws on back of array bracket.
(See Figure 13)
Figure 13
3
3
3
(J2)
x 4
portrait tension
2
3
2
1
4
3
3
3
1
2
2
3
