Installation Instructions
IR10
5
4.
Using a slotted screwdriver, connect power and signal wires
to the IR to Dry Control accessory (A). (See Figure 2)
Figure 2
The remote control has a range of 20-30ft (6-9m), and is
powered by 2 AAA batteries that are accessed from the back of
the remote.
The following table and illustration identify mount functionality
and response by button on the remote control(s).
IMPORTANT ! :
Power must be provided to device and IR
receiver must be installed in order to access extended IR10
programming options.
Normal Operating Mode
Figure 3
KEY
CONTROL OUTPUT
A
COMMON
B
PRESET 1
C
DOWN
D
UP
E
GROUND
F
12V or 24V Power supply
(A) X 1
(A) X 1
(A)
(B)
(C)
(D)
(E)
(F)
COM
C3
C2
C1
12V
KEY
FUNCTION
REQUIRED ACTION
1
NOT USED
N/A
2
NOT USED
N/A
3
CLOSE CONTACT #1
PRESS AND HOLD
4
NOT USED
N/A
5
NOT USED
N/A
6
NOT USED
N/A
7
CLOSE CONTACT #2
PRESS AND HOLD
8
CLOSE CONTACT #3
PRESS AND HOLD
9
NOT USED
N/A
10
NOT USED
N/A
7
1
4
5
2
8
10
9
3
6