Instruction Manual
GPM-110
5
Attaching the VESA Bracket to the Display
(Step 2)
NOTE:
Choose the instructions, listed below, that apply to the
type of installation you want.
•
Flush Mount Applications do not use spacers. The
display is attached to the mount with four screws.
•
Recessed Mount Applications use spacers. The display
is attached to the mount with four screws and four
spacers.
CAUTION:
If monitor uses a screw size other than those
included in the kit, DO NOT use the screws provided.
Using the wrong screws could result in damage to your
monitor.
Flushed Mount
A.
Place the VESA bracket (10) on the display.
B.
Align the hole-pattern of your display with the hole-
pattern on the VESA bracket (10).
C.
Attach VESA bracket (10) to the display using four
M4 X 10mm screws (70) provided.
Recessed Mount
NOTE:
Use one of the following screw and spacer
combinations: (80 with 90) or (100 with 110).
A.
Select four screws (80 or 100) for the Recessed
application.
B.
Select the four spacers (90 or 110) for the Recessed
application.
C.
Set four spacers (90 or 110) over the four mounting
holes on your monitor.
D.
Install four screws (80 or 100) into the top mounting
holes of your display.
Step 2
Recessed Mount
Flushed Mount
70
10
80 or 100
90 or 110