Installation Instructions
FVS200 / FVS250
5
ASSEMBLY AND INSTALLATION
Assembling Shelf to Bracket
1. Lower upper shelf (B or C) to shelf support (A).
(See Figure 1)
Figure 1
2. Attach upper shelf (B or C) to shelf support (A) using two
1/4-20 x 1/2" round head carriage bolts (D), two 1/4" flat
washers (E) and two 1/4" Nylock lock nuts (F).
(See Figure 2)
Figure 2
Attaching to Wall Mount
NOTE:
The FVS200/FVS250 may be attached to the wall
mount with the display already in place, or with the
display removed. Proceed to either
Installing to Wall
Mount with Display Attached
or
Installing to Wall
Mount with Display Removed
section.
Installing to Wall Mount with Display Attached
1. Pull top of display out and away from wall mount.
2. From above and behind the display, lower FVS200/FVS250
onto top rail of wall mount. (See Figure 3)
Figure 3
3. Adjust the shelf up or down on the shelf support (A) by
loosening the adjustment nut, adjusting shelf to desired
height, and tightening the adjustment nut. (See Figure 4)
NOTE:
The FVS200 and FVS250 have a total height
adjustment of up to 6".
1
(B)
(A)
[FVS200 shown]
(D) x 2
2
(E) x 2
(F) x 2
[Display shown removed for clarity]
Ergo In Demand, Inc. Contact Information:
4900 Industry Drive
Central Point, OR 97502
800.888.6024 (Toll Free)
541.779.3763 (Office)
541.779.0829 (Fax)
[email protected] (Email)
