Installation Instructions
FCA802
9
Installing Components (not included)
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight
mounted on the FCA802 does not exceed 20 lbs (9 kg).
WARNING:
Components must be secured to FCA802 shelf
using either adhesive hook and loop squares (T) or screw
(Q)! Failure to securely components to shelf may result in
serious personal injury or damage to equipment!
NOTE:
OPTIONAL
: Slots are provided in shelf for strap (not
included) to hold components in place. (See Figure 14)
Using Adhesive Squares
1.
Use up to eight adhesive hook and loop squares (T) to
secure component to shelf. Attach adhesive squares to
bottom of component first and then attach corresponding
squares to shelf when the exact mounting location has been
determined.
Using Screw
2.
(Single Screw option) Install 1/4-20 x 3/8” Phillips pan
machine screw (Q) through mounting slot on shelf and into
hole on bottom of component (if applicable). (See Figure
14)
Figure 14
Slots provided
for strap
(not included)
2
(Q) x 1
Component
(example -
not included)
1
(T) x 4
