Installation Instructions
FCA802
5
ASSEMBLY AND INSTALLATION
NOTE:
FCA802 shelves may ONLY be installed below
displays.
Assembling Shelf to Upright Bracket
1.
Install two 1/4-20 x 1/2” button head cap screws (L) into
lowest holes on upright bracket (A). (See Figure 1) or (See
Figure 2)
2.
Hang component shelf (D) onto two screws installed in Step
1. (See Figure 1) or (See Figure 2)
3.
Use one 1/4-20 x 1/4” button head cap screw (M) to secure
upright bracket (A) to component shelf (D). (See Figure 1)
or (See Figure 2)
4.
Tighten all three screws to ensure upright bracket (A) is
securely attached to component shelf (D).
Figure 1
Figure 2
Attaching Shelf to Wall Mount
NOTE:
If attaching to cart or ceiling mount, proceed to
Attach
Shelf to Cart/Ceiling Section
.
1.
Use two 1/4-20 x 1/4” button head cap screws (M) and two
large washers (H) to secure shelf bracket (C) to main
bracket (B). (See Figure 3)
CAUTION:
Slide bracket with caution so that the bracket
does not scratch or damage the wall!
2.
Slide main bracket (B) behind wall mount rails until shelf
bracket (C) rests on top of wall mount rail. (See Figure 3)
Figure 3
3.
Slide second shelf bracket (C) underneath lower rail on wall
mount, lining up holes on shelf bracket (C) to main bracket
(B). (See Figure 4)
4.
Use two 1/4-20 x 1/4” button head cap screws (M) and two
large washers (H) to secure shelf bracket (C) to main
bracket (B). (See Figure 4)
Figure 4
(L) x 2
1
3
(M)
2
2
(Below Wall)
(D)
(A)
(L) x 2
1
3
(M)
2
2
(Below Cart/Ceiling)
(A)
(D)
2
(M) x 2
1
(H) x 2
(B)
(C)
(Below Wall)
3
wall mount rails
4
(M) x 2
(C)
(H) x 2
(B)
(Below wall)
